![]() ![]() 4) Is Router detecting "USB_D" from the rig? Is WSJT-X/Commander selecting USB_Data? 5) Are the audio input and audio output in WSJT-X set to *LEFT* channel - particularly on transmit? 6) Is the 7300 menu Set Mode -> Connectors-> DATA MOD = ACC? This selects audio from the ACC jack in USB_D/LSB_D. 3) What do you have selected for FSK/DIGITAL Audio Switching tab in Router? With the Icom transceivers and USB_D, that should be Line Input (Rear) -> the ACC jack. IF PTT_1 is selected the mic cable must be connected. ![]() Generally you want PTT_2 for FSK/DIGITAL. 2) What have you selected for FSK/DIGITAL in the PTT Selector on the PTT tab in microHAM Router? PTT_1 is PTT on the mic cable, PTT_2 is PTT on the ACC cable. It is possible to connect the DIN 13 plug "upside down" (rotated 180 degrees) which means the connections are not correct. On 20:39, Carlo - IK2RPE wrote: Joe, point 1: I tried also the DIN 13 plug "upside down" with no joy (it has never been touched however since a year.) point 2 to 6: all YES for further hint, if I click on "Tune" in WSJT-X, in the window of MK II appears "transmitting" but no power in the IC-7300 73 Carlo IK2RPE -Messaggio originale- Da: Per conto di Joe Subich, W4TV Inviato: mercoledì 14 ottobre 2020 20:49 A: Oggetto: Re: NO power in WSJT-X (Icom-7300 and microHAM MK II + DxLab suite) 1) make sure the ACC connector (DIN 13) is connected properly. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |